STS-06394-Hydraulics-and-Engine-Components-V9800001-V9899999
| No. | Part # | Product Name | Price | |
|---|---|---|---|---|
| 2 | OIL DRAIN HOSE ASY W/ COVER, BV/CV |
|
||
| 3 | MUFFLER, 21 HP BV |
|
||
| 4 | WHEEL HUB ASY, SVRII |
|
||
| 5 | TUBE, UNION 1/2 X 5/8 |
|
||
| 6 | WHEEL MOTOR, Parker TG |
|
||
| 7 | SPACER, WHEEL MOTOR |
|
||
| 8 | HOSE ASSY, STS LONG DROP - 17.50 |
|
||
| 9 | HOSE ASSY, STS STD DROP - 16.25 |
|
||
| 10 | TUBE ASSY, 1/2" LH UPPER |
|
||
| 11 | TUBE ASSY, 1/2" RH UPPER |
|
||
| 12 | TUBE ASSY, 1/2" LH LOWER |
|
||
| 13 | TUBE ASSY, 1/2" RH LOWER |
|
||
| 14 | ELBOW, 90 DEG - 1/2 X 1/2 ID |
|
||
| 15 | PUMP, LH STS |
|
||
| 16 | PUMP, RH STS |
|
||
| 17 | ELBOW, 9/16 O-RING X 3/8 HOSE |
|
||
| 18 | HOSE, 3/8" ID, - 300psi (12" MIN.) |
|
||
| 19 | CLAMP, .69 MAX DIA |
|
||
| 20 | FUEL HOSE, (12" MIN.) |
|
||
| 21 | CLAMP, HOSE |
|
||
| 22 | FITTING, 90 - .50 HOSE |
|
||
| 23 | BUSHING, .78 DIA VITON |
|
||
| 24 | HYD TANK ASSY, STS |
|
||
| 25 | INSERT, FILLER NECK |
|
||
| 26 | CAP, HYDRAULIC TANK |
|
||
| 27 | MTG BRKT, OIL RES |
|
||
| 28 | FILTER HEAD ASY |
|
||
| 29 | TEE, 3/4 O-RING X JIC X 1/2 HOSE |
|
||
| 30 | OIL FILTER |
|
||
| 31 | PLATE, MOTOR BACKING |
|
||
| 32 | HEX HEAD CAPSCREW, 1/2-13 X 4.25 ZINC |
|
||
| 33 | BALL BEARING |
|
||
| 34 | PIVOT, IDLER |
|
||
| 35 | IDLER ARM ASSY, PUMP DRIVE |
|
||
| 36 | FLAT WASHER, 3/8", SEE SI 135 |
|
||
| 37 | SS HHCS, 3/8-16 X 3.50 |
|
||
| 38 | SS LKNUT, 3/8-16 FLG ELAS STOP |
|
||
| 39 | PULLEY, 3.50 IDLER |
|
||
| 40 | KEY, 5 X 5 X 25mm CR1018 |
|
||
| 41 | PULLEY, 5.45 OD - TAPER BORE |
|
||
| 42 | WHEEL ASSY, 20 X 12-10 |
|
||
| 43 | TAPERED HUB, 15 mm BORE |
|
||
| 44 | HEX HEAD BOLT, 1/4-20 X 1.00 GR 8 BLK |
|
||
| 45 | SS HHCS, 3/8-16 X 1.50 |
|
||
| 46 | PLATE, SPEED SENSOR |
|
||
| 47 | LOCK NUT, HEX 1/2-13 CENTER LOCK |
|
||
| 48 | KEY, #C1018 1/4 X 1/4 X 2 |
|
||
| 49 | PULLEY, 5.45 DIA 1.125 BORE |
|
||
| 50 | SS HHCS, 3/8-16 X 2.25 |
|
||
| 51 | BELT, TRANS DRIVE |
|
||
| 52 | FITTING, 90 - .38 HOSE |
|
||
| 53 | PLATE, HUB MAGNET HOLDER |
|
||
| 54 | BUSHING, .56 DIA VITON |
|
||
| 55 | SS HHCS, 5/16-18 X .75 |
|
||
| 56 | SS LKWSHR, 5/16 SPRING |
|
||
| 57 | PIN, COTTER 9/64 X 1-1/2" |
|
||
| 58 | HEX CASTLE NUT, 1.0-20 UNEF |
|
||
| 59 | WHEEL NUT, 1/2-20 X 13/16 HEX, gr5 |
|
||
| 60 | SS LKWASH, 7/16 SPRING |
|
||
| 61 | HHCS,7/16-20 X 1.25 W/ PATCH |
|
||
| 62 | FLAT WASHER, 7/16" |
|
||
| 63 | SS NUT, 3/8-16 UNC |
|
||
| 64 | SPRING, PTO - STT |
|
||
| 65 | SS LKNUT, 3/8-16 FLG ELAS STOP |
|
