WS-06359-Hydraulics-and-Engine-Components-R9600001-R9699999
| No. | Part # | Product Name | Price | |
|---|---|---|---|---|
| 2 | HYD TANK ASY, SVRII |
|
||
| 3 | INSERT, FILLER NECK |
|
||
| 4 | CAP, HYDRAULIC TANK |
|
||
| 5 | BUSHING, .56 DIA VITON |
|
||
| 6 | FITTING, 90 - .38 HOSE |
|
||
| 7 | BUSHING, .78 DIA VITON |
|
||
| 8 | FITTING, 90 - .50 HOSE |
|
||
| 9 | BRKT, HYDRO TANK MTG |
|
||
| 10 | HEX HEAD BOLT, 5/16-18 X 3/4" |
|
||
| 11 | LOCK WASHER, 5/16 SPRING |
|
||
| 12 | CLAMP, .69 MAX DIA |
|
||
| 13 | HOSE, 3/8" ID, - 300psi (12" MIN.) |
|
||
| 14 | CLAMP, HOSE |
|
||
| 15 | FUEL HOSE, (12" MIN.) |
|
||
| 16 | ELBOW, 9/16 O-RING X 3/8 HOSE |
|
||
| 17 | PUMP, SVRII - LH |
|
||
| 18 | PUMP, SVRII - RH |
|
||
| 19 | UNION, O-RING TO JIC 3/4-16 |
|
||
| 20 | ELBOW 1/2 JIC FEMALE TO 1/2 JIC MALE |
|
||
| 21 | TEE, 3/4 O-RING X JIC X 1/2 HOSE |
|
||
| 22 | DRAIN HOSE, SVRII HYDRO |
|
||
| 23 | PLUG, 3/4-16 JIC |
|
||
| 24 | FILTER HEAD ASY |
|
||
| 25 | HHCS,M8-1.25 X 50 ZINC |
|
||
| 26 | OIL FILTER |
|
||
| 27 | NUT, 3/8-16 SERR FLG HH ZINC |
|
||
| 28 | WHIZ NUT, 5/16-18 SERR FLG HH ZINC |
|
||
| 29 | HEX HEAD BOLT, 1/2-13 X 2-1/2 |
|
||
| 30 | PLATE, MOTOR BACKING |
|
||
| 31 | HOSE ASY, SVR - 27.50 |
|
||
| 32 | HOSE ASY, SVR - 15.25 |
|
||
| 33 | TUBE, UNION 1/2 X 5/8 |
|
||
| 34 | PARKER TJ WHEELMOTOR, SVRII |
|
||
| 35 | LOCK NUT, HEX 1/2-13 CENTER LOCK |
|
||
| 36 | WHEEL HUB ASY, SVRII |
|
||
| 37 | WHEEL ASY, 24 X 12.0-12 |
|
||
| 38 | PIN, COTTER 9/64 X 1-1/2" |
|
||
| 39 | WHEEL NUT, 1/2-20 X 13/16 HEX, gr5 |
|
||
| 40 | HEX HEAD CAPSCREW, 7/16-20 X 3.00 W/ PA |
|
||
| 41 | LOCK WASHER, 7/16 |
|
||
| 42 | FLAT WASHER, 7/16" |
|
||
| 43 | CLUTCH, GT3.5 (28.6MM BORE) |
|
||
| 44 | KEY, 1/4 X 1/4 X 3.50 |
|
||
| 45 | CARRIAGE BOLT, 5/16-18 X 3/4" |
|
||
| 46 | BRKT, ANTI-ROTATION |
|
||
| 47 | HEX HEAD BOLT, 3/8-16 x 1-1/2" |
|
||
| 48 | HUB, CLUTCH PULLEY |
|
||
| 49 | SPRING, DECK DRIVE |
|
||
| 50 | HEX LOCK NUT, 3/8-16 ELASTIC |
|
||
| 51 | HEX HEAD BOLT, 1/4-20 X 1.00 GR 8 BLK |
|
||
| 52 | TAPERED HUB, 15 mm BORE |
|
||
| 53 | KEY, 5 X 5 X 25mm CR1018 |
|
||
| 54 | BELT, PUMP DRIVE |
|
||
| 55 | BALL BEARING |
|
||
| 56 | IDLER ARM ASY, PUMP DRIVE |
|
||
| 57 | PIVOT, IDLER |
|
||
| 58 | HEX HEAD BOLT, 3/8-16 x 3-1/4" |
|
||
| 59 | FLAT WASHER, 3/8", SEE SI 135 |
|
||
| 60 | PULLEY, 4.75 DIA - 1.125 DIA BORE |
|
||
| 61 | PULLEY, 4.50 DIA IDLER |
|
||
| 62 | PULLEY, 5.45 OD - TAPER BORE |
|
||
| 63 | HEX HEAD BOLT, 3/8-16 X 2-1/4" |
|
||
| 64 | HEX HEAD BOLT, 3/8-16 X 1-3/4 GRD5 SEC |
|
||
| 65 | FAN COVER, PUMP |
|
||
| 66 | HOSE ASY, SVR - 30.00 |
|
||
| 67 | HEX CASTLE NUT, 1.0-20 UNEF |
|
||
| 68 | OIL DRAIN |
|
||
| 69 | MUFFLER, 37 BV-EFI |
|
||
| 70 | MUFFLER CLAMP, 1-1/2 |
|
||
| 71 | MANIFOLD, 37 BV-EFI |
|
||
| 72 | CLAMP, CABLE-.75 ID |
|
||
| 73 | LOCK NUT, 5/16 FLG HH ELAS STOP |
|
||
| 74 | HEX HEAD BOLT, 5/16-18 X 1" |
|
||
| 75 | LOCK NUT, 5/16-18 ELASTIC TYPE YZ |
|
||
| 77 | FLAT WASHER, 5/16" |
|
||
| 78 | HEX HEAD BOLT, 5/16-18 X 1-1/2 |
|
||
| 79 | HEX HEAD BOLT, 3/8-16 X 1-1/2" |
|
||
| 80 | MUFFLER BRKT, VALVE COVER |
|
||
| 81 | MUFFLER BRKT, ENGINE |
|
||
| 82 | PULLEY, CLUTCH - 7.30 DIA |
|
||
| 83 | STRAP SPACER, MUFFLER |
|
||
| 84 | CARR BOLT,5/16-18 X 1.25 RHSN |
|
||
| 85 | NUT M6 SERR FLG |
|
||
| 86 | KEY, WOODRUFF 5/16 X 1.00 #1008 |
|
||
| 87 | WHEEL BOLT, 1/2-20 X 1-5/8" large base |
|
||
| 88 | TIRE, 24 X 12.00-12 |
|
||
| 89 | RIM, W/STEM |
|
||
| 90 | LKNUT, 3/8-16 FLG HH TOP LOCK |
|
||
| 91 | HEX HEAD BOLT, 5/16-18 X 1.75 |
|
||
| 92 | WHIZ NUT, 5/16-18 SERR FLG HH ZINC |
|
||
| 93 | TUBING, OIL DRAIN-.50 ID (12" MIN.) |
|
