AS30-06432-Hydraulics-and-Engine-Components-Z4900001-Z5099999
| No. | Part # | Product Name | Price | |
|---|---|---|---|---|
| 1 | TUBE, UNION 3/8 X 3/8 |
|
||
| 2 | HOSE ASSY, AS - 42.0 |
|
||
| 3 | MUFFLER, 23CV |
|
||
| 4 | HEAT SHIELD, MUFFLER |
|
||
| 6 | OIL DRAIN, 3.3" long, 3/8 NPT |
|
||
| 7 | HOSE, 3/8" ID, - 300psi (12" MIN.) |
|
||
| 8 | CLAMP, .69 MAX DIA |
|
||
| 9 | ELBOW, 9/16 O-RING X 3/8 HOSE |
|
||
| 10 | HEX HEAD BOLT, 5/16-18 X 3/4" |
|
||
| 11 | FILTER HEAD ASY |
|
||
| 12 | OIL FILTER |
|
||
| 13 | PLUG, 3/4-16 JIC |
|
||
| 14 | DRAIN HOSE, SVRII HYDRO |
|
||
| 15 | CLAMP, HOSE |
|
||
| 16 | FUEL HOSE, (12" MIN.) |
|
||
| 17 | TEE, 3/4 O-RING X JIC X 1/2 HOSE |
|
||
| 18 | LOCK WASHER, 5/16 SPRING |
|
||
| 19 | MTG BRKT, HYDRO TANK |
|
||
| 20 | WHIZ NUT, 5/16-18 SERR FLG HH ZINC |
|
||
| 21 | HYDRAULIC TANK ASY, STC |
|
||
| 22 | BUSHING, .56 DIA VITON |
|
||
| 23 | FITTING, STRAIGHT - HYD TANK |
|
||
| 24 | FITTING, 90 - .50 HOSE |
|
||
| 25 | BUSHING, .78 DIA VITON |
|
||
| 26 | INSERT, FILLER NECK |
|
||
| 27 | CAP, HYDRAULIC TANK |
|
||
| 28 | HYDRAULIC MANIFOLD ASSY |
|
||
| 29 | VALVE ASSY, ADJUSTABLE |
|
||
| 30 | ADAPTER, PLUG |
|
||
| 31 | SENSOR, VALVE |
|
||
| 32 | SENSOR, PLUG |
|
||
| 33 | FITTING, VALVE |
|
||
| 34 | PRESSURE GAUGE |
|
||
| 35 | ADAPTER |
|
||
| 36 | ELBOW, 90 DEG O-RING |
|
||
| 37 | BASE, VALVE |
|
||
| 38 | MNT BRKT, MANIFOLD |
|
||
| 39 | CAPSCREW, 1/4-20 X .50 SERR FLG HH Z |
|
||
| 40 | WHEELMOTOR |
|
||
| 41 | HEX HEAD BOLT, 3/8-16 X 2-1/4" |
|
||
| 42 | PIVOT BEARING WLMT |
|
||
| 43 | LOCK NUT, HEX 1/2-13 CENTER LOCK |
|
||
| 44 | TUBE, UNION 1/2 X 5/8 |
|
||
| 45 | TUBE, UNION 1/2 X 5/8 |
|
||
| 46 | ELBOW 1/2 JIC FEMALE TO 1/2 JIC MALE |
|
||
| 47 | HOSE ASY, STCII - 14.50 |
|
||
| 48 | HOSE ASY, STCII - 17.00 |
|
||
| 49 | HOSE ASY, STC - 15.75" |
|
||
| 50 | HOSE ASSY, 17.0 |
|
||
| 51 | PLATE, MOTOR BACKING |
|
||
| 52 | HEX HEAD CAPSCREW, 1/2-13 X 2.75 |
|
||
| 53 | IDLER PULLEY, 5.00 DIA |
|
||
| 54 | PULLEY, 5.45 OD - TAPER BORE |
|
||
| 55 | BELT, PUMP DRIVE |
|
||
| 56 | KEY, 5 X 5 X 25mm CR1018 |
|
||
| 57 | TAPERED HUB, 15 mm BORE |
|
||
| 58 | HEX HEAD BOLT, 1/4-20 X 1.00 GR 8 BLK |
|
||
| 59 | HEX HEAD BOLT, 3/8-16 x 2-3/4" |
|
||
| 60 | FLAT WASHER, 3/8", SEE SI 135 |
|
||
| 61 | FLAT WASHER, 7/16" |
|
||
| 62 | HEX HEAD CAPSCREW, 7/16-20 X 2.25 W/ PA |
|
||
| 63 | HEX LOCK NUT, 3/8-16 ELASTIC |
|
||
| 64 | BALL BEARING |
|
||
| 65 | HEX HEAD BOLT, 3/8-16 X 3-1/2" |
|
||
| 66 | HYDRAULIC TANK ASSY |
|
||
| 67 | HEX HEAD BOLT, 3/8-16 x 1-1/2" |
|
||
| 68 | PIVOT, IDLER |
|
||
| 69 | LOCK WASHER, 7/16 |
|
||
| 70 | PULLEY, 5.45 DIA - 1.125 BORE |
|
||
| 71 | PULLEY, 4.50 DIA IDLER |
|
||
| 72 | KEY, 1/4 x 1/4 x 3-1/4" |
|
||
| 73 | HOSE ASSY, AS - 49.0 |
|
||
| 74 | HOSE ASSY, AS - 44.0 |
|
||
| 75 | FITTING, VALVE |
|
||
| 76 | CYLINDER, 3.00 BORE X 4.00 STRO |
|
||
| 77 | SPRING, DECK DRIVE |
|
||
| 78 | HEX HEAD BOLT, 3/8-16 X 1-1/4" |
|
||
| 79 | LOCK WASHER 3/8" |
|
||
| 80 | LOCK NUT, 1/4-20 CENTER LOCK |
|
||
| 81 | FLAT WASHER, 3/8 (.406 X 2.25 X .188) |
|
||
| 82 | PUMP, LH |
|
||
| 83 | PUMP, RH |
|
||
| 84 | ELBOW 45 DEG MALE |
|
||
| 85 | FITTING, TEE - O-RING TO BARB, |
|
||
| 86 | CONNECTOR, 6 O-RING TO 3/8 HOSE |
|
